1. Skip to Menu
  2. Skip to Content
  3. Skip to Footer

Catalog

  

CNC Temperature Controller XMT series

CNC Temperature Controller XMT series

1. Input
Any kind of TC, RTD's standard signal of current and voltage (see the kinds sheet of input)
2. Accuracy
Measure accuracy: ±0.5%FS Cold-end Compensation deviation: in the range of ±2?(0~502? can be amended by the software) Resolving power: 14bit Sampling cycle: 0.5 Sec
3. Display
PV?SV: -1999 ~ +1999 Indicates of output?alarm?self-conditioning: LED
4. Controlling output
1.Current output: DC 0 ~ 10 mA, 4 ~ 20 mA (RL< 500?)
2.Voltage output: DC 0 ~ 5 V, 1 ~ 5 V (RL>10K)
3.Relay output: contact capacity 250VA (resistance load)
4.Voltage pulse output: 0 ~12V, (suitable for the solid relay SSR)
5.Controlled Silicone SCR output: over zero trigger or phase trigger(resistant load)
6.Alarm function output: 2 groups output at most, 12 modes. Capacity of the output contact: 250V AC 3A (resistant load)
5. Setting range
Setting value (SV): Measured Present Value (PV) Proportional band (P): 0 ~ whole measured range (when set 0, it's ON/OFF control Integral time: 0~3600 Sec (when the time is 0, the function of integral time closed) Derivative time: 0~ 3600 Sec (when the time is 0, the function of differential time closed) Proportional term: 1~100 Sec Hysteresis loop Width of the phase controlling output:1~100? (or other pv units)
6. Others:
Insulation resistance: >500 M (500DC) Insulation strength: 1500VAC/1min Power consumption: <10VA Using environment: 0~50?, 30~85% RH no corrosive atmospheres environment Weight: about 0.5kg